High Accuracy Gloss Meter Operation Manual
18
7.Standard management
In the main menu, select "Standard Management" and press the OK button to enter
the standard management menu.
Figure 32 Standard Management Menu
7.1 Turn on difference display
In the standard management menu, select "Difference Display" and press the OK
button to modify the difference display switch. After the modification, press the
measurement button or OK button to save the changes.
7.2 Browse/Edit/Delete Standards
In the standard management menu, select "Browse Standards" and press the OK
button to enter the browse standards interface as shown in Figure 33.
Figure 33 View standards interface
In the figure 33, the upper right corner shows the standard name. If it is the current
standard, "*" will be displayed in front of the name.
"value" is the target value of the standard, "lower" is the lower limit of the qualified
sample, and "upper" is the upper limit. In the quality control or statistical mode,
within the range of upper and lower limits are "OK", exceeding it is "NG".
Press the up or down button while browsing the standard to switch the standard.
