High Accuracy Gloss Meter Operation Manual
3
Remark: Use the above icons to represent the corresponding buttons in the
instrument operation prompt
2. Switch on/off
2.1 Startup
The instrument can use battery and USB power supply. When using the battery, press
the measurement button to turn on the power; if using USB power, the instrument
will automatically turn on when USB and the power is connected.
If the calibration box is detected during startup, the instrument will be calibrated
automatically.
If the calibration is passed as shown in Figure 2, it will enter to the measurement
interface saved at the last normal shutdown.
Figure 2 calibration pass
If the calibration is failure, it is as shown in Figure 3.
Figure 3 calibration fail
After the calibration is failure, please choose to press the measurement button to
retry or press the return button to directly enter the measurement interface. If you
try again, please check these first:
1. Whether the calibration box is in good connection or not;
2. Is the calibration tile clean?
3. Calibration tile protection paper is removed.
