28 |
P a g e
OPERATION
Figure 7:
Quick reference chart for placing the unit in manual day mode
End of procedure
Put the unit in manual day mode (continued)
8.
Launch the manual day mode and return the display to the homepage.
a.
Press the
Reset key twice
to save the Event 2 parameter as
On, launch the day mode, and return to the homepage.
Home Page: Day Mode
Active 2, 3, 5
Set the manual day mode temperature
9.
On the homepage, while operating in the day mode, adjust the day
temperature set point.
a.
Use the Up or Down Arrows to adjust the green set point to
that of your cultivation application.
•
After the set point is adjusted there may be a pause as the
unit controller calculates the optimum heating profile before
heating or cooling to the new set point.
Note:
The manual mode temperature set points use memory slots separate
from those of the day - night auto cycle. Changing the manual temperature
set points
does not change
the auto cycle set points.
Day mode temperature
set point adjusted.
Heating to new set point
X2
