Sheldon SHEL LAB SVAC1, Installation And Operation Manual, Page: 58 / 78

58 | P a g e
MAINTENANCE
Continued next page
Unlocking the Controller Continued
4
Advance to the second security parameter, “LoC.P”
a. Push the Advance button once, saving the
previous parameter and advancing to the next
parameter.
5
Adjust the LoC.P setting from 2 to 3.
a. Push the Up arrow button.
6
Advance twice . Skip through the “PAS.E” Password Enable
parameter to “rLoc”, leaving “PAS.E” set to Off.
a. Push the Advance button twice.
Leave set to Off
7
Adjust the rLOC parameter from 2 to 5.
a. Push the Up arrow button.
8
Advance to the “SLOC” Write Security parameter.
a. Push the Advance button once.
x2