Sheldon SHEL LAB SVAC1, Installation And Operation Manual, Page: 45 / 78

45 | P a g e
OPERATION
S
ETTING THE
C
ONSTANT
T
EMPERATURE
S
ETPOINT
T
EMPERATURE
P
ROGRAMS
Please see the temperature program manual included with this oven for how to program automated
heating recipes. The manual provides illustrated explanations for all major program functions and
programming steps.
Pushing EZ1 launches heating Program 1. Pushing EZ1 again while running aborts Program 1.
Pushing EZ2 launches heating Program 2 (Step 11). Pushing EZ2 again while running aborts Program 2.
1.
Adjust the constant temperature setpoint on the homepage
Adjust
•
Stay 10°C below the high
limit setpoint.
Note : Holding down an arrow
button will cause the temperature
to advance in increments of ten
(10).
2.
Release the arrow buttons after adjusting the setpoint
•
There may be a brief pause as the oven controller
calculates the optimum power usage to achieve the
setpoint starting from the current oven chamber
temperature.
•
A small illuminated 2 near the bottom of the display
indicates the temperature controller is calling for
heat.
Oven Heating