Shel lab SRI3, Operation Manual, Page: 13 / 42

13 | P a g e
INSTALLATION
I
NSTALLATION
C
HECKLIST
For installing the unit in a new workspace location.
Pre-Installation

Check that the required ambient conditions and ventilation spacing for the incubator
are met, page 14.
•
Unit dimensions may be found on page 39.

Check that a suitable electrical outlet and power supply is present, page 15.
Install the Incubator in a suitable location

Review the lifting and handling instructions, page 16.

Install the incubator in its workspace location, page 16.

Make sure the incubator is level, page 16.
Set up the Incubator for use

Verify that all packaging has been removed from the incubator shelving and
incubation chamber. Adjust the shelving positions if need be, page 17.

Clean and disinfect the incubator and shelving accessories that will be placed in
the incubation chamber, page 17.