Shel lab SRI3, Operation Manual

Page: 16 / 42

16 | P a g e
INSTALLATION
L
IFTING AND
H
ANDLING
The unit is heavy. Use appropriate lifting devices that are sufficiently rated for these loads. Follow these
guidelines when lifting the unit.
•
Lift the unit only from its bottom surface.
•
Doors, handles, and knobs are not adequate for lifting or stabilization.
•
Restrain the unit completely while lifting or transporting so it cannot tip.
•
Remove all moving parts, such as shelves and trays, and lock doors in the closed position
during transfers to prevent shifting and damage.
L
EVELING
The unit must be level and stable for safe operation.
I
NSTALL
I
NCUBATOR IN
L
OCATION
Install the unit in a workspace location that meets the criteria discussed in the previous entries of the
Installation section.