AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm
Page 6
Always operate the product with the Blade Assembly/Cup in place.
Blades are sharp; handle carefully.
The use of attachments or accessories not recommended or sold by the
manufacturer can cause electric shock or injury.
Do not attempt to place the Bowl/Jug on the Base or remove the Bowl/Jug
from the Base while the motor is running.
Always operate the product on a flat, level, stable surface.
Do not allow the Power Cord to hang, such as over the edge of a table or
counter, where it may be tripped over or pulled.
Do not operate blender for more than 1 Minutes continuously, allow the motor to
rest for 1 minute before continuing as this could damage the motor.
Do not operate Processor for more than 1 Minute continuously; allow the motor
to rest for 1 minute before continuing as this could damage the motor.
The motor has a thermal circuit breaker that will shut off the electric motor if it
overheats. If the motor shuts off on its own, immediately unplug the Power Cord
and let the motor cool down for at least an hour. When the power cord is
unplugged and the product cools, it will reset and be ready to use again.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
