AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm
Page 10
6.
Then choose”1”or”2”speed for processing. During the operation, you can take
out the filling cap on blender cover (18) and add water or any other
ingredients you want through the filling hole.
Mini Chopper (23-24)
Step 1
Step 2
1.
Position the motor base (2) on dry, flat surface.
2.
Turn anticlockwise and separate the blade base (23) and cup (24). (as per
Step 1)
3.
Put the dry ingredients like coffee beans into the cup (24) (as per step 2); Do
Not exceed half a cup.
4.
Hold the cup and place the blade base on the top and turn clockwise (as per
step 3)
5.
Place the mini chopper on the motor base and turn clockwise to lock in. (as
per step 4)
Attention:
Do not put too much ingredients in the cup, Do Not exceed half of cup,
and make sure the blade base is fixed firmly, otherwise the ingredient may spill over
during working.
6.
Plug in and use pulse 2-3 times to ensure the blade base is correctly installed.
7.
Then choose ”1”or”2”speed for chopping. Do not exceed 30s continuous use,
then stop for 1 min for motor to cool down. You can choose the cycle times
according to your requirements.
8.
Turn off the appliance and turn anticlockwise to separate the mini chopper,
and then invert the mini chopper to make the blade base (22) upward, turn
anticlockwise to separate the blade base (22) and cup (23), and pour out the
ingredients into a container.