Seite 29 von 38
SETTING FUNCTIONS
You can set all functions directly on the device or using the remote control.
Depending on the set function both the indicators on the operating panel display and
the symbols on the remote control display illuminate.
SWITCHING THE DEVICE ON
1. Connect the device to a grounded outlet.
2. When you switch the device on
for the first time
a start signal is emitted and the
device immediately switches to its standby mode.
3.
Press the POWER button to switch the device on. The POWER indicator lights up.
NOTE
Never switch the air conditioning unit off by pulling the plug. Always use the on/off button to
switch the device off and wait a few minutes before disconnecting it from mains. This allows
the device to perform a cycle of functional checks.
SETTING MODES
Cooling mode
Ideal for cooling the room in hot and humid weather.
OPERATING PANEL
REMOTE CONTROL
Press the POWER button.
Press the
button.
“POWER” on the operating panel lights up.
Use the buttons and to set the desired temperature.
Use the “FAN” button to set the desired
blower level:
Use the
button to set the desired
blower level:
HIGH
High blower level
MEDIUM
Medium blower level
LOW
Low blower level
Once you set the desired fan level the “FAN” indicator lights up.
NOTE
In the summer we recommend setting a room temperature between 24 and 27 degrees
Celsius. Generally it is not recommended to set a temperature far below the outside
temperature.
