Seite 28 von 38
REMOTE CONTROL
1. Preparing the remote control
– inserting or replacing batteries
Please follow these instructions:
1. Remove the cover on the back of the remote control.
2. Now insert two AAA batteries
Observe the information on the inside of the battery
compartment to properly insert the batteries.
3. Now put the cover back onto the remote control.
NOTE
If the remote control has to be replaced or disposed of, you must take the batteries out and
dispose of them in accordance with the applicable regulations! Also remove the batteries in
case you won't use the remote control for a longer period of time to avoid corrosion damage.
If you have to replace batteries always replace them with the same type and charge status.
2. Correct use of the remote control
Point the remote co
ntrol directly at the device’s front and make sure there are no obstacles
between the remote control and the device.
NOTE
Please handle the remote control with care. Do not expose the remote control to direct
sunlight and keep it away from sourced of heat.
3. Description of the remote control
BUTTONS
1.
POWER
2.
MODI
3.
Increase
4.
Decrease
5.
SPEED
6.
TIMER
7.
OSCILLATION
8.
set °F or °C
9.
SLEEP
Display
Buttons
