Seite 18 von 28
SETTING THE FUNCTIONS
Operate the dehumidifier using the control panel:
LED INDICATORS
BUTTONS
WATER FULL
Watertank full
POWER
Turn the device on
SETTING
Humidity
TIMER
Timer
LOW
Low Speed
HIGH
High Speed
6. POWER
On/Off
7. SETTING
Set the humidity
8. Display
9. TIMER
Set the timer
10. SPEED
Set the fanspeed
When operating the Dehumidifier, please always pay attention to the display, which
shows the following:
1. When you turn on the device, it will show the room humidity level
2. When you set the humidity level, it will indicate the humidity that you
have selected.
3. When you set the timer, it will show the hours.
POWER
Push the
POWER-
button to turn the device ON and OFF.
When turning the dehum ON
– a beep sounds, and the POWER-Indicator will light up
green.
HUMIDITY
Use the
SETTING
-button to set the desired humidity.
It can be set from 40% - 80% in 5% intervals, which will show up on the display.
The respective indicator will light up.
NOTE
If the ambient humidity is 2% below the set humidity after a certain time, the compressor and
the fan stop approx. 3 minutes later.
