background image

- 2 -

FEATURES

• Desktop fan, air cooler and humidifier in one 
• Cools spaces up to 45 sq. ft.  
• Chemical free and eco friendly
• Operates with or without water
• Color-changing night light / mood light with brightness control 
• Sleek, stylish design 
• Optional aromatherapy (scented oil not included) 
• Plugs into an AC outlet 

 

PACKAGE CONTENTS

DESCRIPTION OF PARTS

INTRODUCTION

The Personal Evaporative Cooler uses a built-in fan plus the scientific principles of evaporation to 
create a natural cooling effect, without harmful chemicals. The amount of cooling will depend on two 
factors: the indoor humidity and the current room temperature.

For example:

•  At 30% indoor humidity and a room temperature of 77°F, the air output temperature will be 60°F
•  At 40% indoor humidity and a room temperature of 77°F, the air output temperature will be 62°F

•  At 30% indoor humidity and a room temperature of 86°F, the air output temperature will be 66°F
•  At 40% indoor humidity and a room temperature of 86°F, the air output temperature will be 69°F

•  At 30% indoor humidity and a room temperature of 95°F, the air output temperature will be 72°F
•  At 40% indoor humidity and a room temperature of 95°F, the air output temperature will be 

75.5°F

 

Cooling pad compartment lid

PERSONAL EVAPORATIVE COOLER

Water tank

User interface

Louvers

Water tank lid

Fan

USB power port

COOLING PAD (INSTALLED IN DEVICE) 

USB POWER CORD WITH AC ADAPTER 

INSTRUCTION BOOKLET

Louver control knob

Summary of Contents for 207377









Reviews: