background image

- 7 -

GENERAL SAFETY WARNINGS

•  Use only the power cord and AC adapter that came with this device. 
•  Plug this device into an AC outlet. A computer USB port may not provide sufficient power. 
•  Fill the water tank with clean water only. 
•  Do not fill the water tank without the Cooling Pad in place.  
•  Do not splash the user interface. If water spills onto the body of this device, unplug it and let it dry for 24 

hours before using it again. 

•  Do not insert foreign objects into the device.
•  Do not place chemicals or flames on or near the device.  
•  Keep this device away from high heat and direct sunlight. 
•  Do not immerse this device in water or any other liquid.  
•  Do not block the air inlet or output.  
•  Do not attempt to modify or repair this device. There are no user-serviceable parts. 
•  This device is not a toy. Keep out of reach of children. 

SPECIFICATIONS

Product size: 

7.7” L x 7” W x 7.1” H

Weight (without water):

 2.8 lbs.

Model no.:

 Sharper Image Item No. 207377

Input:

 DC 5V 2A

Max power consumption:

 7W

Power cord:

 USB Type-C 1.2m

Maximum cooling area: 

4m2 (43 sq. ft.)

Water tank capacity:

 1000ml

Water consumption:

 6-10 hours

Cooling duration:

 7-13 hours

Summary of Contents for 207377









Reviews: