-24
Operation Buttons
Selecting the Input Signal Source
Using the Operation Buttons
Press
INPUT
on the projector,
INPUT 1
,
INPUT 2
,
INPUT 3
or
INPUT 4
on the remote control to select the desired input
mode.
• When no signal is received, “NO SIGNAL” will be displayed.
When a signal that the projector is not preset to receive is
received, “NOT REG.” will be displayed.
On-screen Display
Adjusting the Picture Aspect Ratio
This function allows you to modify or customize the
picture display mode to enhance the input image.
Depending on the input signal, you can choose
NORMAL, BORDER or STRETCH image.
1
Press
RESIZE
. Each time
RESIZE
is pressed, the
picture mode changes as shown on the next page.
1
INPUT button
INPUT 1 Mode
INPUT 4 Mode
INPUT 2 Mode
INPUT 3 Mode
