-14
Setup & Connections
When the RS-232C port on the projector is connected to a computer with an RS-232C cable (null modem, cross
type, commercially available), the computer can be used to control the projector and check the status of the
projector. See pages 52 and 53 for details.
Connecting a computer with analog RGB output
1
Connect the computer-RGB cable end to the INPUT 2 COMPONENT/RGB port on the projector.
2
Connect the other end to the computer.
When connecting this projector to a DVD player or DTV decoder, select “RGB” for “Signal Type” on the OSD menu or press
RGB/COMP.
on the remote control. (See page 36.)
Connecting to a Computer
Computer-RGB cable
RS-232C cable
(null modem, cross type, commercially available)
1
2
Connecting to a DVD Player and DTV Decoder
Connecting to a DTV decoder with analog RGB output
1
Connect the computer-RGB cable to the INPUT 2 COMPONENT/RGB port.
2
Connect the other end to the corresponding terminal on a DTV decoder.
When connecting this projector to analog RGB output of the DTV decoder, select “Component” for “Signal Type” on the
OSD menu or press
RGB/COMP.
on the remote control. (See page 36.)
CAUTION
• Make sure to turn both the projector and the video equipment off, before connecting.
DTV decoder
Projector
Computer-RGB cable
1
2
