Setup
-23
Projecting a Reversed Image
Projection from behind the Screen
■
Place a translucent screen between the projector and the audience.
■
Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page
Projection Using a Mirror
■
Place a mirror (normal flat type) in front of the lens.
■
When the translucent screen is placed between the mirror and audience, set to “Front” in the “PRJ Mode”
menu. (See page
■
When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See page
Info
•
When using a mirror, ensure that both the projector and the mirror are carefully placed so the projected
light does not shine into the eyes of the audience.
Ceiling-mount Setup
■
It is recommended that you use the optional Sharp ceiling-mount
bracket for this installation.
Before mounting the projector, contact your nearest Sharp Au-
thorized Projector Dealer or Service Center to obtain the recom-
mended ceiling-mount bracket (sold separately).
•
AN-PHCM20 ceiling-mount bracket, its AN-EP101AP extension
tube (for the U.S.A.).
•
AN-NV6T ceiling-mount bracket, its AN-TK201 and AN-TK202
extension tubes (for countries other than the U.S.A.).
■
Invert the image by setting “C Front” in “PRJ Mode”. See
page
for use of this function.
Translucent screen
Audience
Set to “Front”
Audience
Translucent screen
Mirror
Set to “Rear”
Audience
Mirror
Summary of Contents for XG-PH70X - XGA DLP Projector
Page 110: ...SHARP CORPORATION ...
