Sharp XE-A177 Full Detailed Instruction Manual Download Page 73

Page: 73 / 134

■

Percent (

, %2)

Procedure

Program each item as follows:

• RATE (Use the numeric entry)

Percent rate (0.00 to 100.00)

• TEXT (Use the character entry)

Description for the percent key. Up to 12 characters can be
entered.

• SIGN (Use the selective entry)

Programming of the + or - sign assigns the premium or
discount function to each percent key.
+: Plus (premium)
-: Minus (discount)

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
HALO (High Amount Lockout) for the percent key (0.00 to
100.00)

NOTE

In the initial programming, the HALO function is programmed as
"INVALID".

• ITEM (Use the selective entry)

YES: Enables the item %.
NO: Disables the item %.

• SUBTOTAL (Used the selective entry)

YES: Enables the subtotal %.
NO: Disables the subtotal %.

■

You can program an upper limit amount and description for received-on-account key.

Procedure

Program each item as follows:

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 9999999.99

NOTE

In the initial programming, the HALO function is programmed as
"INVALID".

• TEXT (Use the character entry)

Description for the received-on-account key. Up to 12
characters can be entered.

Summary of Contents for XE-A177







































































































































Search results

Summary of Contents for XE-A177

Reviews:

Related manuals for XE-A177

Brands by name

Popular brands

Sharp XE-A177, Full Detailed Instruction Manual

Search results

Summary of Contents for XE-A177

Reviews:

Related manuals for XE-A177

Brands by name

Popular brands