Sharp XE-A177 Full Detailed Instruction Manual Download Page 127

Page: 127 / 134

127

Cleaning the Printer (Printer Head/Sensor/Roller)

When the printed text is getting dark or faint, paper dust may be stuck to the printer head, sensor and/or
roller. Clean them as follows:

Caution: Never touch the printer head with a tool or anything hard as it may damage the head.

The paper cutter is mounted on the printer cover. Be careful not to cut yourself.

Select the OFF mode.

Remove the printer cover.

Lift up the print roller arm.

Remove the paper roll referring to the “Removing the

paper roll” section.

Clean the printer head with a cotton swab or soft rag

moistened with ethyl alcohol or isopropyl alcohol.
Clean the roller and the sensor in the same manner.

Reset the paper roll correctly by following the steps in

“Installing the paper roll.”

Printer head

Print roller arm

Sensor

Roller

Summary of Contents for XE-A177







































































































































Search results

Summary of Contents for XE-A177

Reviews:

Related manuals for XE-A177

Brands by name

Popular brands

Sharp XE-A177, Full Detailed Instruction Manual

Search results

Summary of Contents for XE-A177

Reviews:

Related manuals for XE-A177

Brands by name

Popular brands