Sharp XE-A177 Full Detailed Instruction Manual Download Page 115 | Manualshive

Page: 115 / 134

background image

115

SD CARD Mode

The register’s data can be saved to the SD memory card, and the programming data can be loaded from the
SD memory card.
To use the SD card function, select the “7 SD CARD MODE” in the mode selection window and perform the
following operations.

■

Inserting and removing an SD memory card

The SD card slot is located on the front side of your register.

Inserting an SD memory card

Insert an SD memory card into the SD card slot with the printed
SD logo facing upwards. Push the card in steady with a finger until
it clicks and release it slowly.

Removing the SD memory card

Push in the card gently with a finger and release it. The card will
come out.

NOTE

• This model supports SD cards only. Use of any other types of SD cards such as mini SD, micro SD, etc.

with an adapter is not supported.

• When inserting or removing the SD memory card, be sure to release it slowly. Otherwise, the card may pop

out and injure your finger.

• Never touch or remove the SD memory card while it is accessed, otherwise the data stored in it may be

damaged.

• Formatting the SD memory card erases all the data in it.

CAUTION

Never turn the power off, while the SD memory card is accessed.

■

SD card formatting

When the SD card is not formatted yet, take the formatting operation.

Procedure

(1) Select “4 FORMATTING” in the SD CARD mode, the confirmation window is displayed.
(2) To perform the format operation, select OK and press the

A

key.

To cancel the operation, select CANCEL and press the

A

key.

■

Folder creating

The master folder can be created for the data file.
(¥ SHARP¥ ECRXXX11¥ nnnnnnnn¥ : nnnnnnnn/folder name)

Procedure

(1) Select “3 FOLDER CONTROL” in the SD CARD mode and press the

A

key.

(2) Select “1 CREATE FOLDER”, the folder name entry window is displayed.
(3) Enter the required folder name and press the

A

key.

To cancel the operation, press the

a

key.

«
...
113
114
115
116
117
...
»

Summary of Contents for XE-A177







































































































































Reviews:

No comments

Related manuals for XE-A177

Brand: Royal Pages: 51

Brand: Lamassu Pages: 4

Brand: Nautilus Hyosung Pages: 61

Brand: Nautilus Hyosung Pages: 102

Brand: Sam4s Pages: 36

Brand: Olivetti Pages: 61

Brand: Olivetti Pages: 76

Brand: JCM GOLD Pages: 42

Brand: Lindgren-Pitman Pages: 2

Brand: Mitutoyo Pages: 76

Brand: dotykacka Pages: 121

Brand: dotykacka Pages: 122

Brand: Agilent Technologies Pages: 44

Brand: Keysight Technologies Pages: 273

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands