Sharp XE-A177 Full Detailed Instruction Manual Download Page 72

Page: 72 / 134

■

Discount (

)

Procedure

Program each item as follows:

• AMOUNT (Use the numeric entry)

Discount amount (max. 8 digits)

• TEXT (Use the character entry)

Description for the discount key. Up to 12 characters can be
entered.

• SIGN (Use the selective entry)

Programming of the + or - sign assigns the premium or
discount function to each discount key.
+: Plus amount (premium)
-: Minus amount (discount)

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 999999.99

NOTE

In the initial programming, the HALO function is programmed as
"INVALID".

• ITEM (Use the selective entry)

YES: Enables the item discount.
NO: Disables the item discount.

• SUBTOTAL (Used the selective entry)

YES: Enables the subtotal discount.
NO: Disables the subtotal discount.

Summary of Contents for XE-A177







































































































































Search results

Summary of Contents for XE-A177

Reviews:

Related manuals for XE-A177

Brands by name

Popular brands

Sharp XE-A177, Full Detailed Instruction Manual

Search results

Summary of Contents for XE-A177

Reviews:

Related manuals for XE-A177

Brands by name

Popular brands