52
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
VCR RESET
1.
Press the
STOP
button on the front of the VCR.
2.
Press and hold
MENU
and the
CHANNEL
(
/
] buttons together for 10 seconds.
✔
VCR RESET IS NOW COMPLETE
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel, this can be set manually (21-69) by following the
procedure below:
1.
Press the
STANDBY
button.
2.
Press and hold the
MENU
button on the VCR front panel for 3 seconds.
3.
Wait for a flashing channel number to appear on the VCR display.
4.
The channel number can now be changed by using the
CHANNEL
(
/
]
buttons.
5.
Press the
SET
button to store.
6.
Your TV will now require tuning to the new
channel.
(White text
blue background)
RF THROUGH ON/OFF:
If you wish to connect yhour VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON by pressing the
CLEAR
button then the
SET
button on the
remote control at point 3 of the
RF CHANNEL TUNING
above. This will help minimise
interference.
V CR R F
S E T
: E N T E R
ME NU : E X I T
TINS-3894 ENGLISH.book Page 52 Wednesday, September 6, 2000 11:53 AM
