22
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
ADVANCED OPERATION
AUDIO DUBBING
RECORDING SOUND ON TO A VIDEO TAPE (AUDIO DUBBING)
This feature enables you to add narration or background music to a pre-recorded tape.
•
The audio signal will be recorded on the mono track. The Hi-Fi track will remain
unchanged..
1.
Connect the audio source to the AUDIO
IN L-R terminals on the front of the VCR as
shown above.
2.
Insert the pre-recorded tape into the
VCR.
3.
Press
PLAY/X2
(
) to view the
recording.
4.
If you wish to listen to the original Hi-Fi
track while you are recording the new
dubbed audio track you will need to set
AUDIO MIX to ON in the mode menu.
5.
Press
PAUSE/STILL
(
) when you
reach the point on the tape where you
want audio dubbing to start.
6.
Press
A.DUB
(
A.DUB
will be shown on
your TV)
NOTE:
The input source will be
automatically changed to L3 (Front
phono jacks)
7.
Press
PAUSE/STILL
(
) , to start audio
dubbing.
8.
Press
STOP
(
) , to finish audio dubbing
(
A.DUB
will disappear from your TV)
+
Connect your
audio equipment
to AUDIO IN L-R
terminals on the
front of your VCR.
If a microphone is to be used,
connect it to your audio
equipment
AUDIO SOURCE
II A. DUB
L3
SP
TINS-3894 ENGLISH.book Page 22 Wednesday, September 6, 2000 11:53 AM
