31
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
ADVANCED OPERATION
RECORDING FROM OTHER EQUIPMENT
You can record video and audio signals from various sources, for example a camcorder, onto
a video tape using your VCR.
For example, recording from a camcorder connected to LINE 2 IN/DECODER on your VCR:
1.
Connect your signal source (e.g. Camcorder, Digital Camera, etc.) to the desired scart
socket on he back of the VCR using the manufacturers recommended cable (not
supplied).
2.
Ensure that the tape on which you
wish to record is inserted into the VCR..
3.
Press
INPUT SELECT
on the remote
control until the VCR display shows
L2
.
4.
If you wish to record from a source
connected to LINE 1 IN/OUT, select
L1
.
5.
If you wish to record from a source
connected with audio phono leads to
the sockets on the front of the VCR
and S-VIDEO connection lead, select
L3
.
6.
Press
REC
to start the recording.
NOTES:
•
There are many different ways of connecting external equipment to your VCR. Please
refer to your equipment operation manuals for further information.
•
S-Video connection has priority over the Video connection when both are connected
to the L3 input.
•
To Record/Playback audio when connected via the S-Video input you must also
connect the audio phono leads (L3).
Optional SCART connection (not supplied).
Mono/Stereo Camcorder
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
G
D
S-VIDEO OUT
SORTIE SON S-VIDEO
AUDIO
(R)
AUDIO
(L/MONO)
VIDEO
AM
PM
AM
PM
AUDIO OUT
AM/PM
LOW
ZERO BACK
INPUT SELECT
7
8
0
9
DPSS
R
SORTIE
S-VIDEO OUT
SORTIE SON S-VIDEO
LINE IN 3
VIDEO
L - AUDIO - R
S-VIDEO
INPUT SELECT
AM
PM
TINS-3894 ENGLISH.book Page 31 Wednesday, September 6, 2000 11:53 AM
