Flash Select Setting for PBX
30
Flash Select Setting for PBX
Note:
This setting is normally only used in Germany. In other countries, you
can try changing the setting if you encounter difficulty with the default setting.
If your fax machine is connected to a PBX and the PBX uses the “Flash”
method to connect to an outside line, you must select the appropriate Flash
Select setting depending on whether your PBX line is a normal telephone line
or a high-speed line.
1
Press
once and
3 times.
2
Press
once and
5 times.
3
Press
once.
4
Select
(SHORT TIME) if your PBX
line is a normal telephone line.
Select
(LONG TIME) if your PBX
line is a high-speed line.
5
Press
to return to the date and time display.
The display briefly shows
your selection, then:
Display:
OPTION SETTING
FLASH SELECT
FLASH SELECT
1: SHORT TIME
FAX SIGNAL RX
all.book Page 30 Tuesday, March 29, 2005 9:08 AM