Sharp UX-A260 Operation Manual Download

Page: 38 / 108

Override Ringing

Press

once and

3 times.

Press .

Press the number keys to enter a 3-digit override code.

Press

to store the override code, and then

to return

to the date and time display.

START/MEMORY

STOP

OVERRIDE CODE

Overriding the answering system

Your callers should follow the steps below to override the answering system.

The caller calls your machine from a touch-tone telephone. When the

outgoing message begins, they should press the

key on their

telephone.

•

The caller will hear a short beep, and the outgoing message will stop.

The caller should enter the override code and

by pressing the

appropriate keys on their telephone.

•

If an incorrect code is entered, the caller will hear four beeps. He or she
must re-enter the correct code within 10 seconds or the line will be
disconnected.

Your machine will make a special ringing sound. Pick up the handset to
answer the call.

•

If you do not answer within 30 seconds, the outgoing message will play
again and the caller can leave a message.

all.book

Page 36

Wednesday, June 4, 2003

1:07 PM

Summary of Contents for UX-A260













































































































Search results

Summary of Contents for UX-A260

Reviews:

Related manuals for UX-A260

Brands by name

Popular brands

Sharp UX-A260, Operation Manual

Search results

Summary of Contents for UX-A260

Reviews:

Related manuals for UX-A260

Brands by name

Popular brands