Sharp UP-820N Instruction Manual Download Page 189

Page: 189 / 277

— 187 —

Personnel Programming

Use the following procedure for personnel programming:

Server

Procedure

In the SETTING window, select “07 PERSONNEL.”
• The PERSONNEL window will appear.

Select the “SERVER”.
• The SEVER window will appear.

Select the server name.

Program each item as follows:

• SECRET CODE (Use the numeric entry method)

Secret code (max. 4 digits: 0001 to 9999/0000)

• NAME (Use the character entry method)

Name for the server. Up to 12 characters can be entered.

• ENTRY (Use the selective entry method)

GLU(PBLU):

Compulsory GLU(PBLU)

NON-COMPULSORY: Non-compulsory GLU(PBLU)

• G.C.COPY (Use the selective and method)

ENABLE: Enables G.C.Copy.
DISABLE: Disables G.C.Copy.

• DRAWER# (Use the numeric entry method)

Drawer number (1 or 2/0)

• NET SALES% (Use the numeric entry method)

Net sales percent rate
(max. 5 digits, 0.00 to 100.00)

Summary of Contents for UP-820N






















































































































































































































































































Search results

Summary of Contents for UP-820N

Reviews:

Related manuals for UP-820N

Brands by name

Popular brands

Sharp UP-820N, Instruction Manual

Search results

Summary of Contents for UP-820N

Reviews:

Related manuals for UP-820N

Brands by name

Popular brands