SX
™
Service and Maintenance Manual 1-2 960714-02B © 2007 I2407
SECTION 1 – INTRODUCTION
GENERAL INFORMATION
MODEL VARIATION
This manual has been developed to assist in
servicing and maintaining the Sharp SX
™
with
Printer model 1108 and the Sharp SX
™
model
1109. Although this manual has been written for
this specific model, the procedures and
techniques for replacing components and
troubleshooting can generally be applied to all
models of the SX
™.
Major differences in
machine maintenance or component repair will
be noted on a case by case basis. The parts lists
and assembly drawings located in sections 5 and
6 of this manual are specifically for these two
models. If a replacement part is needed for an
older model of machine, please refer to the CD
located in the front of this manual. This CD
contains the parts lists and assembly drawings
for all previous models of the Sharp SX
™
and the
Sharp SX
™
with Printer.
The replacement parts lists located on the CD
have been separated by model number for ease
of identifying the parts that are needed. Simply
locate the section of the manual that coincides
with the SX
™
model you have and proceed from
there.
To determine which model of the Sharp SX
™
you
have, refer to Figure 1-1. The serial number is
located on a placard or sticker directly below the
roll unwind shaft. The highlighted numbers in
Figures 1-2 and 1-3 coincide with the model of
the machine.
TECHINCAL ASSISTANCE
Assistance with the
SX™
can be obtained by
notifying Sharp Packaging Systems at:
Sharp Packaging Systems
PO Box 124
Sussex, WI 53089, USA
Service: 800-634-6359 (ext. 572)
Parts: 800-634-6359 (ext. 571)
Fax: 262-246-3387
Figure 1-1. Serial Tag Location
Serial Tag
Figure 1-2. Model 1075 and 1084 Serial Tag
Model Number
Figure 1-3. Model 1097, 1099, 1108, and 1109
Serial Tag
Model Number
