Sharp SW-120NC, Instruction Manual

Page: 45 / 111

4 ‐ 11
No Item Function Description
cutting programs can be set.)
Blade deviation detector (optional) can be also configured in
this setup page.
Refer to Cutting Display & Setup in the following page.
14
Cutting program setting
Press this button to directly enter the cutting job program
setup page.
A total of 100 cutting programs can be set.
15
Material cutting
reference
This reference chart lists out the required blade speed and
cutting rate for each different material.
16
PLC monitor Shows current PLC signals.
17
Error report
Lists a historical report of the errors and the time of
occurrence as well as provides troubleshooting support. 6
pages in total.
18
Quick approach function
indicator
Indicates that the quick approach bar is contacting the
upper limit switch.
When quick approach function is activated, the saw blade
icon will turn solid white.
19
Saw blade down
indicator
Indicates that a cut is completed and the saw blade is at its
lowest position.
When the blade completes each cut and triggers the lower
limit switch, the saw blade icon will turn solid white.
20
Rear vise status
indicator
Indicates if the rear vises have clamped and secured the
workpiece.
When the rear vises have secured the workpiece, the
clamping vise icon on the right will turn solid white.
21
Front vise status
indicator
Indicates if the front vises have clamped and secured the
workpiece.
When the front vises have secured the workpiece, the
clamping vise icon on the right will turn solid white.
22
Feeding movement
indicator
When the feeding vise reaches the front limit, the vise set
icon will turn solid white.