E
23
Please check the following before calling for service. It may save you time and expense.
PROBLEM
POSSIBLE CAUSE
SOLUTION
1
Part or all of oven does not
operate.
• Power cord of oven is not completely
connected to the electrical outlet.
• Power outage.
• Fuse/circuit breaker at home doesn’t
work.
• Oven is in Demo Mode.
• Make sure the power cord is tightly connected to the
outlet.
• Check house lights to be sure. Call your local electric
company for service.
• Replace the fuse or reset the circuit breaker.
• See page 20 to cancel Demo Mode.
2
Food in oven is not heated.
• No power to the appliance.
• Oven controls improperly set.
• Oven is in Demo Mode.
• See SOLUTION for PROBLEM 1.
• Check if the controls have been properly set.
• See page 20.
3
Oven light does not work.
• Light bulb is loose or burned out.
• Call for service.
4
Touch controls will not
operate.
• Control Lock is on.
• See page 20 to unlock.
5
Display flashes.
• Power failure.
• Touch CLEAR pad and reset the clock. If the oven
was in use, reset the cooking function.
BEFORE YOU CALL FOR SERVICE
SHARP ELECTRONICS CORPORATION
•
100 Paragon Drive • Montvale, New Jersey 07645 • USA
SHARP ELECTRONICS OF CANADA LTD
•
335 Britannia Road East • Mississauga, Ontario • L4Z 1W9 • Canada