22
E
CLEANING
The outside surface is precoated metal and plastic. Clean the
outside with mild soap and water; rinse and dry with a soft
cloth. Do not use any type of household or abrasive cleaner.
STAINLESS STEEL SURFACE
The exterior should be wiped often with a damp soft cloth
and polished with a dry soft cloth to maintain its beauty.
There are also a variety of products designed especially for
cleaning and shining the stainless exterior of the oven. We
recommend that the cleaner be applied to a soft cloth then
carefully used on the stainless exterior, rather than sprayed
directly on to it. Follow package directions carefully.
FRONT SIDE OF THE OVEN
Wipe the window on both sides with a damp soft cloth to
remove any spills or spatters. Metal parts will be easier to
maintain if wiped frequently with a damp soft cloth. Avoid
the use of spray and other harsh cleaners, as they may stain,
streak or dull the oven surface.
TOUCH CONTROL PANEL
If desired, the touch pads may be deactivated before cleaning.
See the Control Lock information on page 20 of this manual.
Wipe the panel with a soft cloth dampened slightly with water
only. Dry with a soft cloth. Do not scrub or use any sort of
chemical cleaners. Close oven and follow directions on page
20 for turning Control Lock off. Touch
CLEAR
.
INTERIOR
Cleaning is easy because no heat is generated to the interior
surfaces; therefore, there is no baking and setting of spills
or spattering. To clean the interior surfaces, including oven
sealing surfaces, wipe with a damp soft cloth. DO NOT USE
ABRASIVE OR HARSH CLEANERS OR SCOURING
PADS. For heavier soil, use mild soap and wipe clean with
a damp soft cloth. Do not use any chemical oven cleaners.
ODOR REMOVAL
Occasionally, a cooking odor may remain in the oven. To
remove odor, combine 1 cup water with
1
/
3
cup lemon juice
in a 2-cup glass. Boil in the oven for several minutes. Leave
in the oven until water cools. Wipe interior with a soft cloth.
WATER DRAINING
In the event of excess water being in the Smart Combi Steam
Oven engine or a steam function that is interrupted during
operation, your oven may need to drain to reset itself.
An ATTENTION message will display, alerting the need for
the oven to drain the water.
Ensure the reservoir is empty. If not, empty the reservoir and
replace.
Draining water into the reservoir will take approximately 1
minute.
Once complete, detach the reservoir and discard the water.
