(3) Paper size setting mode
Procedure
State
1
Press the tray select key for 5 sec.
Same as setting of the user simulation.
2
Select the tray to be set with the zoom key.
The display of "– –" on the number display disappears and the
display lamp of set tray is lighted.
3
Select the fixed magnification ration for the set tray paper size.
The paper size is changed in sequence every time when the
magnification ratio key is pressed.
4
Press the COPY button to determine the paper size
—
5
Press the tray selection key.
Escape from paper size setting mode
•
When this key is pressed during selection of paper size setting
mode, the mode returns to 1 (Paper size setting mode is
allowed.).
*
Press the clear key
•
After setting the paper size, when this key is pressed, the mode
returns to 2 (Paper size setting mode is allowed.).
(4) User simulation code table
Program
Sim. code
Selection code: Set content
Factory setting
Auto clear passing time setting
[1]
[0]: Cancel
[1]: 30 sec
[2]: 60 sec
[3]: 90 sec
[4]: 120 sec
2
Pre-heat mode setting and passing time setting
[2]
[0]: Cancel
[1]: 1 min
[2]: 15 min
[3]: 60 min
[4]: 120 min
2
Auto power shut off mode setting and passing time setting
[3]
[1]: 5min
[2]: 15 min
[3]: 30 min
[4]: 60 min
[5]: 120 min
[6]: 240 min
3
Auto pre-heat control mode setting and cancel
*
[4]
[0]: Cancel
[1]: Setting
0
Auto document feeder manual document feed mode setting
[5]
[0]: Cancel
[1]: Setting
0
Sorter take-out mode
[7]
[0]: Cancel
[1]: Setting
1
Auto paper selection
[8]
[0]: Cancel
[1]: Setting
1
Auto tray selection
[9]
[0]: Cancel
[1]: Setting
1
Auto power shut OFF setting
[20]
[0]: Cancel
[1]: Setting
1
*
When the auto pre-heat control function is selected, the setting of pre-heat/auto power shut off becomes invalid.
[Priority in auto pre-heat control]
8 – 17
