[8] SIMULATION
6. User simulation
This simulation allows to change and set the following setting which has been set when shipping from the factory.
(1) Functions which can be set and canceled by the user simulation
Function name
Function and setting content
Factory setting
Auto clear
•
After completion of copying, when a certain time is passed, the machine returns to the initial
state automatically. The time to return to the initial state is set in the range of 30 - 120 sec in
increment of 30 sec. This function can be cleared.
60 sec
Pre-heat
•
When the copier is left without copying with the power ON, the power consumption is
automatically lowered to 60Wh. The time to start this function is set in the range of 1 min - 120
min.
15 min
•
When this function operates, the pre-heat lamp on the operation panel is lighted.
To return to the initial state:
Press any key on the operation panel. (If the COPY button is pressed, the machine returns to
the initial state and performs copying.)
If also the original is set or the tray is pulled out, the machine returns to the initial state.
Auto power shut off
•
When the copier is left without copying with the power ON, the power consumption is
automatically lowered to 10Wh. The time to start this function is set in the range of 5 min - 120
min.
30 min
•
When this function operates, al the lamps on the operation panel except for the pre-heat lamp
are turned off.
To return to the initial state:
Press the COPY button. The machine returns to the initial state.
Auto pre-heat control
•
This function learns the use conditions of the copier to automatically control the time to start the
pre-heat function and the auto power shut off function to the optimum level. This function can
be activated or inactivated.
Cancel
•
When this function is activated, the time settings in the pre-heat function and the auto power
shut off function are ignored.
Auto shut OFF
•
When the copier is left without copying for a certain period, this function is used to enable or
disable the function of lowering the power consumption.
Set
Auto document
feeding unit manual
document feed mode
•
By use of the auto document feeder (option), originals of different sizes are fed manually.
Cancel
•
When this function is activated, set an original during the original feed lamp blinks after
completion of copying of the previous original, and the original is fed automatically.
Sorter take-out mode
•
When the sorter (option) is installed, the interval between bins can be extended to facilitate to
take out the copy by pressing the copy take-out key.
Set
*
Note: The value of power consumption in pre-heat or in auto power shut off may vary according to the use conditions.
(2) User simulation
Simulation procedure
State
Warning
LED
Paper
supply LED
Copy
quantity
display
Copy
button
LED
1. Press the tray selection
key for 5 sec or more.
User simulation input is allowed.
Blink
Blink
OFF
2. Enter the simulation code
No. with the10-key pad.
Selection of simulation code No.
Blink
Blink
ON
3. Press the COPY button.
Determination of simulation code
Blink
OFF
ON
4. Enter the selection code
No. with the 10-key pad.
Selection of simulation code menu
Blink
OFF
ON
5. Press the COPY button.
Determination of simulation code menu
Blink
OFF
OFF
6. Press the tray selection
key.
Escape from user simulation.
OFF
OFF
Returns to
the copy
quantity
display.
—
•
When this key is pressed during selection of user
simulation, the mode returns to 1 (User simulation is
allowed.).
*
Press the clear key.
(Use this key in case of erroneous input)
Blink
Blink
OFF
•
After setting the program, when this key is pressed, the
next program input is allowed.
(
:
Blink)
1
1
1
2
1
2
1
8 – 16
