5. Drum section
5-1. Drum unit removal
1
Open the front cover.
2
While pressing down the release lever
A
, open the toner
cartridge slowly. (Arrow
B
)
3
Remove the screw and remove the drum unit.
6. Developer section
6-1. Developer unit removal
1
Open the front cover.
2
While pressing down the release lever, open the toner cartridge
slowly and remove it.
3
Loosen the step screw
A
.
4
Pull out the developer unit.
6-2. Developer cartridge removal
1
Place the magnet roller of the developer unit on the box to protect
it.
2
As shown in the figure below, open the section which is pressing
the cartridge pawl with a screwdriver, and pull out the developer
cartridge.
6-3. Toner motor removal
1
Remove four short screws
A
and one long screw
B
, and the
connector, and separate the toner cartridge section.
A
B
A
6 – 13
