(2) User simulation prcedure
Simulation procedure
State
Paper jam/
developer
replacement/
toner supply
warning LED
Copy quantity
display
Print LED
1. Press the paper feed section select
key for more than 5 sec.
User simulation input allowed.
Blink
OFF
2. Enter a code number with 10 key.
Simulation code selection.
Blink
ON
3. Press the COPY button.
Simulation code determined.
Blink
ON
4. Enter the selection code with 10 key.
Simulation code menu selection.
Blink
ON
5. Press the COPY button.
Simulation code menu determined.
Blink
OFF
6. Press the paper feed section select
key.
Escape from user simulation.
OFF
Returns to
copy quantity
display.
—
*
Press the clear key.
•
When this key is pressed during user
simulation selection, the mode returns to
state 1 (user simulation input allowed.)
(Use this key to correct mistyping of input.)
Blink
OFF
•
After completion of program setting, when
this key is pressed, the mode the following
program input can be made.
(
:
Blink)
1
1
1
2
1
2
1
(3) User program code table
[ES conforming area]
Program
P
code
Selection code:
Set content
Factory setting
Auto clear passing
time setting
1
0
: NO
1
: 30 sec.
2
: 60 sec.
3
: 90 sec.
4
: 120 sec.
2
: 60 sec.
Preheat mode
setting and passing
time setting
2
0
: NO
1
: 30 sec.
2
: 60 sec.
3
: 90 sec.
4
: 120 sec.
0
: NO
Auto off mode
passing time setting
3
1
: 30 min.
2
: 60 min.
3
: 90 min.
4
: 120 min.
5
: 240 min.
0
: NO
Since P code
[5] is set to "[0]:
NO," this
setting is set to
[0] though there
is no selection
code specified.
Stream feeding
mode setting and
cancel (Only
models with SPF)
4
0
: NO
1
: YES
0
: NO
Auto power shut off
mode setting, cancel
5
0
: NO
1
: YES
0
: NO
@
When auto power shut off mode passing time setting (operation
with P code [3]) is made under the state where the auto power
shut off mode is canceled ("[0]: NO" is selected with P code [5]),
the machine enters the auto power shut off mode set conditions
without operation with program [5].
8 – 13
