11
REMOVE OF SIDE PLATE L-R
1. Remove the panel B-A and faucet ass’y in accordance with “REMOVE OF PANEL B-A”.
2. Put the jig into rear of the unit.
3. Remove 2 screws holding the switch ON/OFF ass’y.
4. Remove 4 screws holding the condenser ass’y and remove 6 screws from the side plate L-R to the tank
support.
5. Remove 4 screws holding the back plate and remove lead wire earth from side plate-L.
6. Turn front unit and remove 4 screws holding the side plate reinforce to the stand.
7. Now the side plate L-R are free.
Fig. 11
Stand
Side plate-L
Lead wire earth
Screw
Screw
Side plate reinforce
Side plate-R
Screw
Condenser ass’y
Jig
Tank support
Switch ON/OFF
SW. fixing plate
Screw
Screw
Screw
Back plate
REMOVE OF SPACE TANK
1. Remove 2 screws holding the top plate and detach out the top plate from the unit.
2. Remove 4 screws holding the space tank.
3. Remove 2 clamp for silicone tube from space tank.
4. Now the space tank is free.
Fig. 12
Top plate
Tank cooler ass’y
Silicone tube
Clamp for silicone tube
Screw
Space tank
Summary of Contents for SB-29
Page 4: ...4 WIRING DIAGRAM CIRCUIT DIAGRAM ...
Page 19: ...19 ...
