2
YOUR OVEN AND ACCESSORIES
OVEN:
1.
Control panel
2.
Oven lamp
3.
Door opening handle
4.
Waveguide cover (DO NOT REMOVE)
5.
Bottom grill heating element
6.
Turntable motor shaft
7.
Oven cavity
8.
Door seals and sealing surfaces
9.
Door latches
10.
Top grill heating element
11.
Ventilation openings
12.
Outer cabinet
13.
Power cord
ACCESSORIES:
Check to make sure the following accessories
are provided:
14.
Turntable
15.
High rack
16.
Low rack
• Place the turntable on to the turntable motor
shaft, ensuring it is located firmly.
• To avoid turntable damage, ensure dishes or
containers are lifted clear of the turntable rim
when removing them from the oven.
• For use of the racks, refer to the grill, convection
and combi cooking sections on pages 10 to 14.
Never touch the grills when they are hot.
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that
it is not damaged.
• After cooking fatty foods without a cover, always clean the cavity and especially the grill heating
elements thoroughly, these must be dry and free from grease. Built-up grease may overheat and
begin to smoke or catch fire.
• Always operate the oven with the turntable fitted correctly. This promotes thorough, even cooking.
A badly fitted turntable may rattle, may not rotate properly and could cause damage to the oven.
• The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you
start the oven. This does not affect cooking performance.
• When you order accessories, please quote both the
PART NAME
and
MODEL NUMBER
to your dealer
or SHARP approved service facility. The model number is located at the bottom of
the control panel.
Warning:
The door, outer cabinet, oven cavity, accessories, dishes and especially the grills will
become very hot during operation. To prevent burns, always use thick oven gloves.
11
13
12
14
15
16
4
7
8
9
6 5
10
1
2
3
R-890SLM_EN.indd 2
R-890SLM_EN.indd 2
2/25/09 9:37:15 AM
2/25/09 9:37:15 AM
