a minute for the projector to warm up. There will be both solid and flashing green
lights on the projector.
5.3 Once there are 2 solid green lights on the projector indicating that it has warmed up,
press the button labeled VIDEO. If the projector is not warmed up it will not come on.
Try pressing VIDEO once again if the projector is warmed up but there is still no
image on the screen.
5.4 If you no longer need the projector, or if it will be turned off for more than 10 minutes,
press the blue power button on the remote. This will turn off the projector. Please
note that you cannot immediately turn the projector back on. It takes a few minutes
for it to cool down and can be turned back on when you see a solid red light on the
projector.
*** To temporarily turn projector off, press MUTE on the remote. Projector will
turn itself back automatically in 10 minutes, or when you press MUTE again.
6.0 On VCR, U-Matic or Laserdisc (Console #2)
6.1 Power ON to VCR1 (VHS VCR), VCR2 (U-Matic) or LDP1 (Laserdisc).
6.2 Insert and start playing video or disc.
7.0 Clean up
7.1 Power OFF to Projectors.
7.2 Remove video or disc from player.
7.3 Power OFF to PRIMARY CONTROL.
25
