Sharp PN-V701 Operation Manual Download Page 69 | Manualshive

Page: 69 / 70

background image

69

E

•  When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.
•  Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
•  This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.

• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the

thickness of the mounting bracket.

Screws (M6)
Mounting bracket
Monitor mounting

5/16 - 3/8 inch (8-10 mm)

• Do not use an impact driver.
• When moving the monitor, be sure to hold it with the handles. Do not hold the top, bottom, or sides of the monitor. Do not

hold the LCD panel. Also, do not orient the monitor so that the LCD panel faces the ground. This may cause product damage,
failure, or injury.

•  When performing an installation where the monitor is stacked, please install it such that load is not placed on the monitor.
•  After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
•  Do not use any screw holes other than VESA holes for installation.

Mounting Precautions

(For SHARP dealers and service engineers)

«
...
67
68
69
70
»

Summary of Contents for PN-V701







































































Reviews:

No comments

Related manuals for PN-V701

Brand: Raymarine Pages: 360

Brand: Raymarine Pages: 260

Brand: TE Connectivity Pages: 13

Brand: Samsung Pages: 92

Brand: Princeton Pages: 22

Brand: Uniden Pages: 32

Brand: TV One Pages: 12

Brand: PanelPilot Pages: 10

Brand: WAGNER Pages: 2

Brand: Deco Gear Pages: 32

DuralVision FDF2304W-IP

Brand: Eizo Pages: 75

Laser LT RD-1550

Brand: C&S Controls Pages: 44

Brand: Mottura Pages: 40

Brand: Postium Pages: 34

Brand: EDH Pages: 43

Marquee-Lite PLUS 3225

Brand: Pro Lite Pages: 10

Brand: Numark Pages: 12

Brand: Duemmegi Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands