Sharp PN-V701 Operation Manual Download Page 54

Page: 54 / 70

INFORMATION

Information about this monitor appears.

CONTROL

You can control the operations corresponding to the POWER

button, INPUT button, etc. on the remote control unit. (See

page 20.)

TIPS

• In standby mode, only Power ON operation is available.

ADJUSTMENT

You can adjust these settings which are also available on the

monitor’s menu.

• SCREEN (See page 25.)

• PICTURE (See pages 26 to 27.)

• PICTURE (ADVANCED) (See page 27.)

• SETUP (See pages 28 to 29.)

• MONITOR (See page 30.)

• OTHERS (See page 32.)

• SCHEDULE (See page 35.)

• MULTI (See page 31.)

• PIP/PbyP (See page 31.)

• FUNCTION (See page 37.)

TIPS

• After changing DISPLAY COLOR PATTERN to OFF, click

[Refresh] to correctly retrieve the status of the monitor.

Controlling the Monitor with a computer (LAN)

Summary of Contents for PN-V701







































































Search results

Summary of Contents for PN-V701

Reviews:

Related manuals for PN-V701

Brands by name

Popular brands

Sharp PN-V701, Operation Manual

Search results

Summary of Contents for PN-V701

Reviews:

Related manuals for PN-V701

Brands by name

Popular brands