MAINTENANCE
Be sure to disconnect the power cord from the wall outlet or turn off the circuit
breaker before performing any maintenance.
MAINTENANCE AFTER AIR
CONDITIONER SEASON
1
Operate the unit in the COOL
mode, temperature setting 32°C,
for about half a day to allow the
mechanism to thoroughly dry.
2
Stop the operation and unplug
the unit. Turn off the circuit
breaker, if you have one exclu-
sively for the air conditioner.
3
Clean the filters, then reinstall
them.
MAINTENANCE BEFORE
AIR CONDITIONER SEASON
1
Make sure that the air filters are
not dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.
3
Check the outdoor mounting rack
periodically for wear and to make
sure it is firmly in place.
CLEANING THE UNIT AND THE REMOTE CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour water on them. We can cause electrical shock or
equipment damage.
• Do not use hot water, thinner, abrasive powders or strong solvents.
E-16
AUXILIARY MODE
Use this mode when the remote control is not available.
TO TURN ON
Press the AUX. button using a thin stick
on the indicator panel.
• The red OPERATION lamp (
) on the
unit will light and the unit will start operating
in the AUTO mode.
• The fan speed and temperature setting are
set to AUTO.
TO TURN OFF
Press the AUX. button again.
• The red OPERATION lamp (
) on the
unit will turn off.
NOTE:
If the AUX. button is pressed during normal operation, the unit will turn off.
AUX.
GS-XP07ER_Eng.p65
04.1.13, 10:16 AM
18
Summary of Contents for Plasmacluster GS-XP07ER
Page 2: ......
Page 93: ...ENGLISH ...
Page 94: ...SHARP CORPORATION OSAKA JAPAN TINSEA374JBRZ TH 04AO 1 Printed in Thailand ...
