Sharp PC-GP10 Series Operation Manual Download Page 36

Page: 36 / 111

2-13

Watching DVD-ROM Video

You can enjoy watching DVD-ROM video on your computer using the application
called Win DVD. See online help of Win DVD for more details.

Before watching DVD-ROM video, follow the instructions below:

•

Connect the AC adapter. If the battery is discharged, the operation
will stop.

•

Disable the power management. See Power Management of
chapter 3.

•

Close any applications which are unnecessary.

Make sure to remove the DVD-ROM disk from the drive when you finish
watching it. If you turn off the computer with the disk inserted in the
drive, the drive may not be recognized when the computer is turned on
again.

Changing Region Code

DVD-ROM disks have a Region code which prevents playback of the disks in
certain regions. Region code appears on the top of the disk.

When shipped from the factory, the region code of your DVD-ROM drive is set to
Region 2.

Available region codes are:

Region Code

Area

U.S.A, Canada, U.S. Territories

Europe, South Africa, Middle East, Japan

Southeast Asia, East Asia(including Hong Kong)

Australia, New Zealand, Pacific Islands, Central

America, Mexico, South America

Former Soviet Union, Indian Subcontinent, Africa

6 China

Summary of Contents for PC-GP10 Series
















































































































Search results

Summary of Contents for PC-GP10 Series

Reviews:

Brands by name

Popular brands

Sharp PC-GP10 Series, Operation Manual

Search results

Summary of Contents for PC-GP10 Series

Reviews:

Brands by name

Popular brands