2-13
2
4.
Place your CD, label side up, on the tray.
5.
Slightly press the center of the CD until it clicks into place.
6.
Gently push the CD tray back into the CD-ROM drive unit.
•
When inserting a CD, do not use force.
•
Make sure the CD is correctly inserted into the tray, then close the tray.
•
Do not leave the tray open. Also, avoid touching the lens in the tray. If
the lens becomes dirty, the CD-ROM may malfunction.
•
Do not wipe the lens with materials with rough surface (such as paper
towels). Instead, use a cotton swab to gently wipe the lens.
•
Maximum output and wavelength of the laser: 3.6mW, 795nm
CLASS 1LASER PRODUCT
LASER KLASSE 1
FDA regulations require the following statement for all laser-based
devices:
“Caution, Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.”
Removing a CD
1.
Make sure the CD-ROM drive indicator does not light on.
2.
Press the eject button to open the CD tray slightly.
3.
Gently pull out the tray.
4.
Remove the CD from the tray.
5.
Gently push the CD tray back into the CD-ROM drive unit.
•
When opening the CD tray, if the CD is still spinning, wait until it has
stopped, then remove it.
•
Do not remove the CD if the CD-ROM indicator LED is still lit;
otherwise the computer may malfunction