manualshive.com logo in svg

Sharp PC-AX Series, Manual, Page: 83 / 90

Share
Download
Sharp PC-AX Series Manual Download Page 83

T

rou
bleshoo

ting

Troubleshooting  T-2

Trouble when Starting

Question: Why doesn't the power switch function?

•

 

Make sure the AC power cable is correctly connected to a live wall outlet.

•

 

If the computer is operating with batteries, batteries may be discharged. Connect
the computer to a wall outlet.

Question: Why doesn't Windows start?

•

 

Check whether the external floppy disk drive unit contains a non-system disk.
Remove the floppy disk from the drive, and press any key.

•

 

If you are attempting to boot from the external floppy disk drive, check to make
sure the disk is fully inserted and seated into the drive.

•

 

If you attempt to boot from the external floppy disk drive, check whether the

Diskette A

 is set to the first in

 Boot Sequence

 in the 

Main

 menu of the Setup

Utility.

Question: Why do I get a non-system disk or disk error message?

•

 

You may have inserted a non-bootable disk in the external floppy disk drive unit
(either a defective disk or one without an installed operating system). Remove the
disk.

•

 

If this message is issued when you attempt to boot from your hard disk drive,
insert a bootable disk into the external floppy disk drive unit and check the status
of your hard disk drive.

•

 

Check whether the items 

IDE Settings

 is correctly set in the 

Main

 menu of the

Setup Utility.

Question: Why do I get the message Operating system not found?

•

 

If you get this message when starting from the hard disk, insert the boot up disk
into the external floppy disk drive unit; then check the condition of the hard disk.

•

 

Enter the Setup Utility and check the status of the hard disk. Check the size of the
hard disk.

Summary of Contents for PC-AX Series



























































































Reviews:

No comments