28
XG-P10XE
No.
Adjusting point
Adjusting conditions
Adjusting procedure
16
Video OFFSET
adjustment
1. Feed the split colour bar
signal.
Group : VIDEO 2
Subject : VBOS(R)
VROS(G)
VROS(B)
2. Press the control switch or
mute button of R/C.
(GAMMA compensation is
set up for the process.).
»
Using the control switches or the remote controller
buttons, adjust the black portion of the signal
becomes bit-less.
19
Tint
1. Feed the split colour bar
signal.
Group : VIDEO 1
Subject : TINT
2. Connect the oscilloscope to
pin (4) of P801.
»
Using the control switches or the remote controller
buttons, adjust the data to have the -(B-Y) wave-
form downhill straight.
17
Video AGC
1. Feed the split colour bar
signal.
Group : VIDEO 1
Subject : AGC
2. Press the control switch or
the remote control’s mute
button (to set the gamma
correction to the process
setting).
»
Using the control switches or the remote controller
buttons, adjust the 100% portion of white signal
becomes bit-less .
18
Video
brightness
adjustment
1. Feed the baseband (split
colour bar) signal.
Group : VIDEO 1
Subject : BRIGHT
2. Press the control switch or
the remote control’s mute
button (to set the gamma
correction to the process
setting).
»
Using the control switches or the remote controller
buttons, adjust the setting until the black signal
becomes bit-less.
100% White Red
20
NTSC colour
saturation level
1. Feed the split colour bar
signal.
Group : VIDEO 1
Subject : N-COLOR
2. Connect the oscilloscope to
pin (1) of P801.
»
Using the control switches or the remote controller
buttons, adjust the difference between the 100%
white portion and the red portion to 0.10 ±0.02 Vp-p.
(same as 100% white)
