15
XG-P10XE
6. Removing the ballast / PFC / sound-out unit assembly.
6-1. Disconnect the ground wire from the inlet unit.
6-2. Remove the two lock screws off the ballast/PFC/sound-out unit assembly. Detach the assembly.
7. Removing the power unit
7-1. Remove the three lock screws off the power PWB. Detach the power unit.
8. Removing the AC power switch and inlet unit.
8-1. Remove the two lock screws off the AC power switch, disconnect the connector (PA) from the inlet unit, and
detach the AC power switch and the inlet unit.
(PA)
(BA)
6-1
6-2
7-1
8-1
to Inlet Unit
Ballast/PFC/
Sound-Out Unit
Inlet Unit
Power Unit
AC Power Switch
(for Lamp replacement)
