19
XG-P10XE
Convergence and Focus Adjustments Mechanism
Notes :
1
The eccentric cam is used for convergence adjustment. This means that the cam’s turning and the linear
movement are not always uniform.
2
This model is not equipped with the LCD image adjustment mechanism. This is because the dichroic prism
is used for image formation. When the LCD panels all get into the best focus, the images are almost
completely converged.
X
Z
θ
Y
X
Y
θ
Z
X
Z
θ
Y
Notch and hole "a"
(Use an eccentric
screwdriver.)
Notch and hole "b"
(Use an eccentric
screwdriver.)
Lock screw "b"
(
θ
Y direction)
G-LCD panel
mounting screws
G adjusting plate
Notch and
hole "c"
(Use on eccentric
screwdriver.)
Notch and hole "c"
(Use an eccentric screwdriver.)
Lock screws "c"
Eccentric cam
(Y direction adjustment)
Eccentric cam
(X direction adjustment)
Eccentric cam
(
θ
Z direction adjustment)
Lock screw "d"
(convergence
adjustment)
R·B adjusting plate
R·B adjusting plate
R·B-LCD
R·B-LCD
R·B-LCD panel
mounting screws
SIDE VIEW (from inside)
SIDE VIEW
Lock screw "a"
FRONT
R-LCD
G-LCD
B-LCD
G-LCD
TOP VIEW
SIDE VIEW (from outside)
