Sharp Notevision PG-B10S, Operation Manual

Page: 47 / 82

-43
Using the
Menu
Auto Power Off
(Auto
Power Off Function)
When no input signal is detected for more than
15 minutes, the projector will automatically en-
ter the standby mode if set to “
” (ON).
The Auto Power Off function will be disabled if it
has been set to “
” (OFF).
Select “ ” (ON) or “ ” (OFF) in “Auto
Power Off” on the “Options” menu.
Setting the menu screen Page 34
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Note
•
When the Auto Power Off function is set to “ON”,
5 minutes before the projector enters the
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
Eco Mode
(Setting the Eco
Mode)
Select “ ” (Eco Mode) or “ ” (Standard
Mode) in “Eco Mode” on the “Options” menu.
Setting the menu screen Page 34
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Description of Eco Mode
Note
•
Although lamp life and noise are improved when
“Eco Mode” is set to “ ” (Eco mode), bright-
ness decreases by 10%.
•
“Eco Mode” is factory preset to “ ” (Standard
mode).
Brightness
90%
100%
Selectable settings
(Eco mode)
(Standard mode)
Power consumption
(When using AC 100V)
170 W
185 W
Lamp life
Approx.
4,000 hours
Approx.
2,000 hours