Sharp MX-B557F Page 49 User Manual Download

Page: 49 / 218

Setup 1: Printer is connected to a dedicated fax line

Connect one end of the telephone cable to the line port of the printer.

Connect the other end of the cable to an active analog wall jack.

Notes:

•

You can set the printer to receive faxes automatically (set Auto Answer to On) or manually (set Auto

Answer to Off).

•

If you want to receive faxes automatically, then set the printer to pick up on a specified number of rings.

Setup 2: Printer is sharing the line with an answering machine

Note: If you subscribe to a distinctive ring service, then make sure that you set the correct ring pattern for

the printer. Otherwise, the printer does not receive faxes even if you have set it to receive faxes

automatically.

Faxing

Summary of Contents for MX-B557F



























































































































































































































Search results

Summary of Contents for MX-B557F

Reviews:

Related manuals for MX-B557F

Brands by name

Popular brands

Sharp MX-B557F, User Manual

Search results

Summary of Contents for MX-B557F

Reviews:

Related manuals for MX-B557F

Brands by name

Popular brands