Sharp MX-B557F Page 20 User Manual Download

Page: 20 / 218

Loading paper and specialty media

Setting the size and type of the specialty media

The trays automatically detect the size of plain paper. For specialty media like labels, card stock, or envelopes,

do the following:

From the home screen, navigate to:
Settings > Paper > Tray Configuration > Paper Size/Type > select a paper source

Set the size and type of the specialty media.

Configuring Universal paper settings

From the home screen, touch Settings > Paper > Media Configuration > Universal Setup.

Configure the settings.

Loading the 550

‑

sheet tray

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately.

Keep all other trays closed until needed.

Remove the tray.

Note: To avoid paper jams, do not remove trays while the printer is busy.

Adjust the guides to match the size of the paper that you are loading.

Note: Use the indicators on the bottom of the tray to position the guides.

Loading paper and specialty media

Summary of Contents for MX-B557F



























































































































































































































Search results

Summary of Contents for MX-B557F

Reviews:

Related manuals for MX-B557F

Brands by name

Popular brands

Sharp MX-B557F, User Manual

Search results

Summary of Contents for MX-B557F

Reviews:

Related manuals for MX-B557F

Brands by name

Popular brands